Dedicated mobile application for Android and iOS allows to operate Tytan®GPS DS511 and Tytan®GPS DS512. Friendly interface allows to send lock/unlock commands to the vehicle, request GPS position and status of car, allows to control external heaters and has a built-in parking meter counter.

IMPORTANT NOTICE! Currently the app is disabled on Google Play by Google. Please download it and install manually, app and tutorial can be found here: tytangps.com/app

Dedicated mobile application for Android and iOS allows to operate Tytan®GPS DS511 and Tytan®GPS DS512. Friendly interface allows to send lock/unlock commands to the vehicle, request GPS position and status of car, allows to control external heaters and has a built-in parking meter counter.

Tytan®GPS DS511 was designed to operate as a GSM-SMS pager. It can be equipped with external GPS module that allows to check the vehicle localisation. Tytan®GPS DS511 can be controlled with SMS commands sent from any mobile phone. It can also operate as GSM-SMS Pager (with optional GPS) monitoring any Vehicle Security System already installed in the vehicle - either CAN based OEM VSS or aftermarket VSS.

Main features of Tytan®GPS DS511:

• GSM-SMS pager integrated with CAN-bus Vehicle Security System central unit,
• alarming state signalisation with SMS messages in GSM network,
• external GPS receiver (optional),
• remote (SMS) control of VSS and remote access to VSS trigger source memory,
• valet mode (service mode),
• operation mode as GSM-SMS Pager monitoring of OEM security system via CAN bus,
• operation mode as GSM-SMS Pager monitoring of any analogue security system already installed in the vehicle,
• operation mode as standalone Vehicle Security System with CAN-bus connection to vehicle electronic systems is armed/disarmed with OEM remotes or SMS commands,

Tytan®GPS DS512 was designed to operate as a complete CAN-bus security system integrated in a single unit with a GSM-SMS pager. It can be equipped with external GPS module that allows to check the vehicle localisation. Tytan®GPS DS512 can be controlled with SMS commands sent from any mobile phone. It can also operate as GSM-SMS Pager (with optional GPS) monitoring any Vehicle Security System already installed in the vehicle - either CAN based OEM VSS or aftermarket VSS.

Main features of Tytan®GPS DS512:

• GSM-SMS pager integrated with CAN-bus Vehicle Security System central unit,
• alarming state signalisation with SMS messages in GSM network,
• external GPS receiver (optional),
• remote (SMS) control of VSS and remote access to VSS trigger source memory,
• valet mode (service mode),
• operation mode as GSM-SMS Pager monitoring of OEM security system via CAN bus,
• operation mode as GSM-SMS Pager monitoring of any analogue security system already installed in the vehicle,
• operation mode as standalone Vehicle Security System with CAN-bus connection to vehicle electronic systems is armed/disarmed with OEM remotes or SMS commands,
• VSS: signalisation if door / trunk / bonnet is open during arming (door ajar),
• VSS: signalisation if the alarm was triggered during disarming,
• VSS: CAN-bus control of hazard lights, central door locking, power windows on some vehicle models,
• VSS: additional sensors input
  •  vehicle interior protection with ultrasonic motion detector (optional),
  • vehicle towing  and wheel theft protection with additional tilt sensor (optional),
• VSS: arming without additional sensors,
• VSS: state of the system is stored in non-volatile memory and is saved during power-off,

The RF module is an external radio frequency module that allows to use addntional Tytan® remote transmitters with Tytan®GPS DS512 CAN-bus alarm. It is installed simply by enabling the RF module in the DS512 programmer and plugging it to the rear 3-pin connector in Tytan® DS412 wite harness.

Moreover in some cars the door locks are controlled over CAN-bus, no need to make any additional analogue connections.Any kind of Tytan® remote transmitters can be used with RF module.

Tytan®GPS DS511 and Tytan®GPS DS512 can be equipped with AUX module that can control e.g. parking heater, trunk release, vehicle lights - (implementing coming home (when arming VSS) and leaving home (when disarming VSS). The module output can be enabled constantly or for a given period of time (1 second - 999 minutes), via SMS command or smartphone application.

The output is disabled after given amount of time or after the dedicated command. The possibility to use AUX output in a given vehicle must be consulted with installer before starting instalation of Tytan®GPS.

All kind of additional sensors may be installed along with Tytan®GPS DS511 and Tytan®GPS DS512. You can check our Guardial Digital Tilt Sensor and Guardial Ultrasonic Sensor HERE.

Tytan®GPS DS512 may be equipped with all kind of sirens: stadard, battery backup and horn type (speaker). Please check avaialble sirens HERE.